Easy renovation of flooring is allowed for apartments and houses for rent, which subject to frequent moving in/out.
The high maintainability of the product contributes to the running cost reduction.
Attach a suction cup to the center of a board and pull it up.
When the center of the board is lifted up, insert your hand beneath it, and raise the short and groove side of the board.
Pull out the short and tongue side in a horizontal direction to remove the entire board.
The combination of the resin mat for vibration suppression and plastic-foam shock absorber reduces impact sounds on lightweight floors. Clattering, high-pitched impact sound that is transferred to lower floors can be suppressed.
Lightweight floor impact sound isolation test (example)
8.7-mm thick renewable floor
35-mm thick ALC board
15-mm thick OSB
2 × 10 lumber
Vibration proof ceiling hanger
RW 55 mm
15-mm thick plasterboard
|Dimensions||For 1st floors: 5.7 mm thick, 150 mm wide × 910 mm long, For 2nd floors: 8.7 mm thick, 150 mm wide × 910 mm long,|
|Packing material, quantity||Cardboard case, 24 pieces (3.276 m2) per case|
|Package weight||For 1st floors: Approx. 24 kg/package, For 2nd floors: Approx. 25 kg/package|
|Base material||MDF, resin (polyvinyl chloride) mat|
|Front surface||Olefin sheet (pre-coated)|
|Edge processing||Tongue-and-groove joint and slight chamfering on all sides|
|Formaldehyde regulations||F4-rank certificate of Minister|
|Special adhesive||Silicone resin adhesive 760 ml/piece [sold separately] Cartridge type, F4-rank certificate of Japan Adhesive Industry Association|