DNZ CUSTOMWOOD / DSL MDF

DNZ CUSTOMWOOD / DSL MDF
Softwood MDF
Featuring excellent workability

Product Features

Softwood Type Product Thickness: 1.8 to 30.0 mm

Light-colored Surface suitable for a variety of surface decoration

Laminating this MDF with a translucent sheet has little effect on the decoration surface. In direct printing masking coat process may be removed.

Smooth Surface

Long wood fibers provide smooth surface suitable for lamination, coating, and other treatments.

Effective Utilization of Untapped Resources and Stable Raw Material Procurement

One of our plants is located in New Zealand where planned-afforested radiata pine trees are abundantly available. Portions of the trees not suitable for sawing are used as the raw material of the MDF for stable raw material procurement.

Product Features Product Features

Product Lineup - Standard Products (JIS Product)

Main raw material TEKWOOD CUSTOMWOOD,DSL MDF
JIS class Formaldehyde emission
Adhesive Bending strength F☆☆☆☆ F☆☆☆ F☆☆ F☆☆☆☆ F☆☆☆ F☆☆
Type U Type 30 ◯(DSL)
Type 25 ◯(DNZ)
Type 15 - - - ◯(DNZ)
Type 5 - - - - -
Type M Type 30 - - -
Type 25 ◯(DSL) - -
Type 15 - - ◯(DSL≧18㎜)

Quality Standards of Standard Products (JIS Product)

Product Lineup - Standard Products (Non-JIS Product)

Main raw material TEKWOOD CUSTOMWOOD,DSL MDF
CARB P2
ULEF -
EPA E1
EN E2

Product Lineup (Custom Order)

Item Main raw material Product group Formaldehyde emission level Features
TEKWOOD CUSTOMWOOD
Floor use Thickness:
2.7 to 12 mm
JIS A 5905:
F☆☆☆☆/
F☆☆☆
  • High water resistance
  • Industry-leading dimensional stability
  • Resistance to floor waxes and cleaners
Acacia 100% - Thickness:
2.5 to 6.0 mm
EN: E1/E2
JIS A 5905:
F☆☆☆☆/
F☆☆☆
  • Sustainable Acacia mangium (Plantation tree) fiber used 100% as raw material
  • High bending strength
  • First-class water resistance in MDF category
  • Difficult to be deformed even at high temperature and high humidity
Ultra-light board - Thickness:
7 mm or over
Density (g/㎝3):
0.3 to 0.6
CARB: P2/
ULEFEN: E1/E2
JIS A 5905:
F☆☆☆☆/
F☆☆☆
  • Lightweight for easy handling and reduced distribution cost
  • Thermal insulation and sound absorption
Ultra-thin board - Thickness:
1.8 mm
CARB: P2/ULEF
EN: E1/E2
JIS A 5905:
F☆☆☆☆/
F☆☆☆
  • Unprecedentedly thin MDF
  • Suitable as surface material due to inherent surface texture of MDF

*The performance values and the certification labels are based on the Japanese test method and standards.

*DAIKEN CORPORATION does not guarantee that the products listed here conform to the laws and regulations of the country or region where they are being used.