Other

Wall Base underlayment Volcanic Vitreous Double Glaze Board

Photo01
Volcanic ash, rock wool, etc. are corrosion proof and hardly combustible materials.
Volcanic ash, rock wool, etc. are corrosion proof and hardly combustible materials.

DAIKEN developed a unique engineered panel by effectively utilizing volcanic products called "Shirasu."
This panel is applicable to various exterior wall underlayment needs due to excellence in decay/termite prevention, dimensional stability and moisture permeability, lightweight but high strength equivalent to structural plywood (special grade in JAS), fire resistance, and so on. Two types of products are available, 12 mm thick or 9 mm thick.

Product Specification

Specifications
Standards JIS A 5440 volcanic silicates fiber reinforced multi-layer board (Declaration of conformity based on JIS Q 1000)
Certifications Fireproof material certified by the Minister of Land, Infrastructure, Transport and Tourism, QM-9142
Formaldehyde regulations Labeling exempted product

Floor base underlayment insulation board

Photo01 Photo02

DAIKEN's insulation board is a fiberboard with a density of less than 0.35 g/cm, manufactured by forming the plant fibers of waste wood etc. produced when buildings are demolished as the raw material.
It is useful for many purposes as an underlayment or curing material for roof, wall, or floor installation.

  • Covering the floor with this curing board after installation securely protects the floor against falling objects and effectively prevents sand scratches and other damage.
  • Water-repellent finish prevents the floor surface from wetting and dirt even if the rain blows in.
  • Slip-proof surface finish ensures safety in building site.

Product Specification

Specifications (Common for Eastern/Western Japan)
Custom dimensions 6 mm thick, 910 x 1,820 mm
Packing material, quantity 150 pieces per case, fastened with Polypropylene bands
Package weight Approx. 450 kg/package
Base material Insulation board
Surface Breathable water-repellent coating
Back surface Formaldehyde absorption treatment
Certifications
  • Designated procurement item in accordance with the Green Purchasing Law(Law Concerning the Promotion of Procurement of Eco-Friendly Goods and Services by the State and Other Entities)
  • Recycling Mark certified product (approved by Japan Fiberboard and Particleboard Manufacturers Association), JFP-M009
  • Eco Mark certified product No. 05111013
Formaldehyde regulations Labeling exempted product

Non Combustible Decoration Base Material

Non Combustible Decoration Base Material

Excellent fire resistance, strength, and lightweight suitable for various types of Non Combustible Decorative base board.

Noncombustible Material with Excellent Fire Resistance
Noncombustible decorative base material ideal for decorative base board products that require high fire resistance
Lightweight and High Strength
Lightweight and high-rigidity noncombustible material with a density of 0.77 g/cm3 <FAL>,highly suitable as a surface material for various types of decorative board products
Excellent Dimensional Stability
Superb dimensional stability equivalent to calcium silicate boards
Exceptional Decorative Surface Quality
Exceptionally smooth surface that significantly improves the quality of decorative surface on coating finished and moisture-permeable sheet finished products
*Please use solvent-free adhesives such as a PUR (polyurethane reactive) hot-melt adhesive).
Easy of Cutting
Base material that can be cut easily using a wood chip saw or even a hand saw
No Preservation Treatment Needed to Prevent Termite/insect Damage and Decay
Base material using an inorganic material that is hardly eaten by termites and wood-destroying fungi.
This is a human-friendly product that eliminates the need for termite, insects, and decay prevention.
Eco-friendly and Human-friendly
Asbestos-free inorganic base material featuring a low environmental load. DAILITE is a formaldehyde labeling exempted product friendly to the earth and human beings.

Product Specification

Specifications (Common for Eastern/Western Japan)
Application Examples Various types of decorative base boards, kitchen hanging door, noncombustible molding, store/hall interior material, wall material for museum repository, flat roof underlayment, etc.
Material composition Thin-paper aluminum-foil laminated on both sides/no volcanic silicates fiber reinforced multi-layer board on back surface (not reversible)
Noncombustibility Noncombustible material certified by the Minister of Land, Infrastructure, Transport and Tourism, NM-1221 (DAILITE FAL) Noncombustible material certified by the Minister of Land, Infrastructure, Transport and Tourism, NM-1220 (DAILITE FTL)
Density (g/cm3) 0.77 (DAILITE FAL) 1.3 (DAILITE FTL)
Bending strength (N/mm2) 12 (DAILITE FAL) 16 (DAILITE FTL)
Peel strength (N/mm2) 0.6
Standard dimensions 6.9 mm thick, 925 x 1,840 mm (DAILITE FAL) 3 mm thick, 925 x 1,840 mm (DAILITE FTL)
Packing material, quantity 6 mm thick: 100 pieces, 9 mm thick: 70 pieces (DAILITE FAL) 100 pieces (DAILITE FTL)
Custom order dimensions 6.9 mm thick, 610 to 1,225 x 1,000 to 3,030 mm (DAILITE FAL) 3 mm thick, 610 to 1,225 x 1,000 to 3,030 mm (DAILITE FTL)
Custom order production lot 3,000 m2 min.
  • The performance values and the certification labels are based on the Japanese test method and standards.
  • DAIKEN CORPORATION does not guarantee that the products listed here conform to the laws and regulations of the country or region where they are being used.

Grass Buster Weed Control Fabric

Grass Buster Weed Control Fabric Grass Buster Weed Control Fabric Grass Buster Weed Control Fabric

Grass Buster thick layer fabric able to block 99% of the sunlight to prevent weeds grown in paddy or mulch.

This fabric weed-proof sheet uses a high-density three-layer structure that cuts 99.9% or more of sunlight to exhibit high light-shielding performance, suppressing the breeding and growth of weeds to reduce the cumbersome maintenance workload such as weeding.

Image High-density Three-layer Structure

Light Shielding

Light Shielding

High light-shielding performance of the sheet through the use of extremely high density woven fabrics suppresses the photosynthesis of weeds to prevent their growth.

Test method: JIS L 1055A
The above test results are based on third-party measurement and not guaranteed values.

Permeability

Permeability

High permeability of the sheet prevents not only water from being pooled on the sheet surface, but also the soil under the sheet from being dried.

Photo showing an example of installation.

Flexibility

Flexibility

High flexibility of the sheet allows flexible installation depending on the condition of the soil, on a slope for example.

Test method: JIS L 1096A, 45-degree cantilever method
The above test results are based on manufacturer measurement and not guaranteed values.

Durability

Durability

The sheet is verified to be durable for approximately 10 years at the installation site in Fukui City, Fukui Prefecture.

Photo showing the sheet installation site (approx. 10 years after installation)
The above data is based on test results provided by the manufacturer and not guaranteed.

Color & Design

Design
Color Samples
Color1
Color2
The front surface is white or green and the back surface is black.
The sheet is reversible and either side can be used as the front surface.
  • The performance values and the certification labels are based on the Japanese test method and standards.
  • DAIKEN CORPORATION does not guarantee that the products listed here conform to the laws and regulations of the country or region where they are being used.